TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to
locate and remedy the problem.
SOLUTION
Insert the power plug into the AC
outlet.
Turn up the volume.
PROBLEM
No power when POWER
is on.
No sound.
POSSIBLE CAUSE
No power plug connection at
the AC outlet.
Volume control is set to
minimum.
Turn up the volume on the TV or
PA system.
Power the TV or PA system on.
TV or PA system is set to
minimum.
TV or PA system is powered
off.
Select the correct function.
The wrong function is
selected.
Connect power cord to machine
securely.
No power when plugged
in.
Power cord is not connected
to machine.
No sound from TV or
PA.
Patch cords are not
connected securely.
Ensure white and red patch cords
are securely inserted into both
The Singing Machine and the
TV/PA system.
Insert disc correctly.
Wipe clean with soft cloth.
Use a new disc.
Use a new disc.
Only use discs bearing standard
logo as described on page E16.
Disc is inserted upside
down.
Disc is dirty.
Disc is scratched.
Disc is warped.
A nonstandard disc is
inserted.
Moisture has formed inside
the CD deck.
Wait about 20 to 30 minutes to let
it dry out.
CD Player does not
work normally or the
LED displays “ ”, “ ”
, or “ ”
aai aa
aaa
Singing Machine needs to
be reset.
Disconnect the machine from the
power source for 30 seconds then
reconnect.
Select AUX IN as the source for
your home stereo.
No sound - when audio
is connected to a home
stereo.
Source Selection on your
stereo is not set properly.
Follow directions on page E13
“AUDIO CONNECTION.”
Improper Connection to
stereo system or PA.
RCA cords are not
connected securely.
Ensure white and red cords are
securely inserted into both The
Singing Machine and the home
stereo system.
No sound - If audio is
going through TV or
VCR.
RCA cords are not
connected securely.
Ensure white and red cords are
securely inserted into both The
Singing Machine and the home
stereo system.
E22
Source Selection on TV or
VCR is not correct.
Follow directions on page E11 for
“Makeing the Connections.”
ENGLISH