Filter
Top Products
9
Connecting to a Mixer, amplifi er or other audio input device
The IR-9000 allows you to either connect each microphone channel individually to separate channels using the CH.1 and
CH.2 outputs (Fig. C) or both microphone channels together through the MIXED output (Fig. D).
Connecting Each Microphone Channel Individually (Fig. C)
What you will need:
• Two ¼” Microphone Cables
• A mixer, amplifi er or other audio input device with two available ¼” microphone inputs
1. Connect one end of each ¼” microphone cable to the CH.1 and CH. 2 outputs on the rear panel of the
reciever unit
2. Connect the other ends to the ¼” microphone input channels on a mixer, amplifi er or other audio input device
Connecting Both Microphone Channels to One Input (Fig. D)
What you will need:
• One ¼” Microphone Cable
• A mixer, amplifi er or other audio input device with one available ¼” microphone input
1. Connect one end of the ¼” microphone cable to the MIX ¼” output on the rear panel of the reciever unit
2. Connect the other end to the ¼” microphone input channel on a mixer, amplifi er or other audio input device
Getting Connected cont.
(BALANCED) (BALANCED)
GAIN GAIN GAIN GAIN
TREBLE TREBLE TREBLE TREBLE
(BALANCED)(BALANCED)
IR-9000
rear panel
KJ-7800PRO
front panel
IR-9000
rear panel
GIG-MASTER
front panel
(Fig. C)
(Fig. D)