Filter
Top Products
17
Microphone
1. LED- This will blink on when micropone power is switched on, it will remain lit
if the battery is weak and needs replacement.
2. On- Turn the microphone power on by moving the switch to the highest
position.
3. Mute- Mute the audio output from the microphone by moving the switch to
this position in the center.
4. Off- Turn microphone power off by moving the switch to the lowest position.
Handheld Microphone Battery Installation
1. To remove the lid, press down on the tab and slide the lid down toward the
bottom of the mic.
2. Insert two fresh 1.5-volt AA alkaline batteries. Make sure the batteries are
inserted in the right direction according to polarity (+/-).
3. Close the BATTERY COMPARTMENT lid.
Descriptions and Functions, cont.