22
Setting Repeat Options
Press the REPEAT button on the remote control to cycle through the available Repeat options
• REPEAT 1: Repeats the same song continuously
• REP ALL: Repeats the entire disc after it has played through
• REPEAT DIR: Repeat a directory of files when playing media files on a drive or CD
• REPEAT OFF: All Repeat options are off
• CHAPTER REPEAT (DVD only): Repeats the current chapter on a DVD disc
• TITLE REPEAT (DVD only): Repeats the current title on a DVD disc
Switching Between PAL and NTSC Video Modes
The PA-MAN is defaulted to NTSC. Use the N/P button on the remote control to switch between PAL and
NTSC.
1. If there is a disc in the PA-MAN make, sure it is stopped
2. Press the N/P button on the remote control
3. Press ENTER on the remote control. The video mode will change
PAL: Europe and A
sia
NTSC: North America
Looping a Section of Disc using the A--B Button
1. Press the A--B button on the remote control to set the starting point of the loop
2. Press the A--B button again to set the ending point of the loop and to begin the loop
3. Press the A--B button a third time to cancel the loop and resume normal playback
Playing One Frame at a Time with the Step Function
The Step function allows you to view one frame at a time on DVDs and VCDs.
NOTE: The Step function does not work on CD+Gs
1. Press the STEP button to enter Step mode and pause the current frame
2. Press it again to jump to the next frame
3. Press PLAY to resume normal playback
Playing Forwards and
Reverse in Slow Motion
You can play a disc forwards or
reverse at 1/2, 1/4 and 1/8 the normal speed
1. Press the SLOW button on the remote control to cycle through the Slow Motion options
2. Press the PLAY button to return to n
ormal playback
Slow Motion options:
• SF 1/2X - Forwards at 1/2 the normal speed
• SF 1/4X - Forwards at 1/4 the normal speed
• SF 1/8X - Forwards at 1/8 the normal speed
• SF 1/2X - Reverse at 1/2 the normal speed
• SF 1/4X - Reverse at 1/4 the normal speed
• SF 1/8X - Reverse at 1/8 the normal speed
General Operations