Filter
Top Products
Using, Creating and Editing Voices
Voice Creating (Sound Creator)
CVP-305/303/301 Owner’s Manual
90
Editable Parameters in the SOUND CREATOR Displays
The following covers in detail the editable parameters that are set in the displays
explained in step 3 of the “Basic Procedure” on page 89. The Sound Creator
parameters are organized into five different displays. The parameters in each dis-
play are described separately, below. These are also treated as part of the Voice Set
parameters (page 96), which are automatically called up when the Voice is
selected.
PIANO
This display is available only when the Natural! piano Voice (page 72) is selected.
COMMON
CONTROLLER
1. MODULATION
When a pedal function is assigned to MODULATION, the pedal can be used to
modulate the parameters below as well as the pitch (vibrato). Here, you can set the
degree to which the pedal modulates each of the following parameters.
The available parameters differ
depending on the Voice.
TUNING CURVE Determines the tuning curve. Select “FLAT” if you feel the tuning
curve of the piano Voice does not quite match that of other instru-
ments Voices.
STRETCH
Tuning curve particularly for pianos
FLAT
Tuning curve in which the frequency is octave doubled over the
entire keyboard range
KEY OFF SAMPLE
(CVP-305/303)
Adjusts the volume of the key-off sound (the subtle sound that
occurs when you release a key).
SUSTAIN SAMPLE
(CVP-305/303)
Adjusts the depth of sustain sampling for the damper pedal.
STRING RESONANCE
(CVP-305)
Adjusts the depth of string resonance.
Portamento Time:
The Portamento Time deter-
mines the pitch transition time.
Portamento is a function that cre-
ates a smooth transition in pitch
from the first note played on the
keyboard to the next.
VOLUME Adjusts the volume of the current edited Voice.
TOUCH SENSE Adjusts the touch sensitivity, or how greatly the volume responds to
your playing strength.
A setting of “0” produces more extreme drops in level, the more
softly you play, while a setting of “64” is normal response, and
“127” produces high volume for any playing strength (fixed).
PART OCTAVE Shifts the octave range of the edited Voice up or down in octaves.
When the edited Voice is used as any of the RIGHT 1–2 parts, the
R1/R2 parameter is available; when the edited Voice is used as the
LEFT part, the LEFT parameter is available.
MONO/POLY Determines whether the edited Voice is played monophonically or
polyphonically (page 78).
PORTAMENTO TIME Sets the portamento time when the edited Voice is set to “MONO”
above.
FILTER Determines the degree to which the pedal modulates the Filter Cut-
off Frequency. For details about the filter, see page 91.
AMPLITUDE Determines the degree to which the pedal modulates the amplitude
(volume).
LFO PMOD Determines the degree to which the pedal modulates the pitch, or
the vibrato effect.
LFO FMOD Determines the degree to which the pedal modulates the Filter
modulation, or the wah effect.