Filter
Top Products
Using the Optional Plug-in Board
Using the Optional Plug-in Board
43
5 Press the [SLOT 1] button and select a voice group.
6 Select a voice.
7 Play the keyboard.
Up to a maximum of two Plug-in Boards can be installed to the 9000Pro (using
both SLOT 1 and SLOT 2), giving you access to an extraordinarily wide range
of sounds.
■ Plug-in Voices and Board Voices
For this example, [II] is
selected.
• A single Plug-in Board can only
sound one part (one Plug-in
voice) at a time. This means
that the playing methods
described on page 17 (turning
parts R1 - R3 on simulta-
neously) and page 18 (turning
parts R and L on simulta-
neously) cannot be used, even
if you select the same slot’s
Plug-in Board voices for the R1
- R3 and L parts.
A
B
C
D
E
Press the corresponding buttons to
select the various pages.
• Please note that even though a
Multi-Part Plug-in Board (e.g.,
PLG100-XG) can be used with
the 9000Pro, the voice list of
the slot corresponding to the
Multi-Part board cannot be dis-
played in the LCD.
See page 65 for details about
the Multi-Part Plug-in Board.
The included floppy disk features specially programmed data (such as effect
settings, etc.) for using the Plug-in Board Voices with the 9000Pro.
• Before loading the disk data, the Board Voices (without any special
processing or programming) are divided into groups of ten and are
selectable from the PLUG-IN VOICE buttons [I] - [XI].
• Once the data on the disk is loaded, you have a new set of voices,
programmed specifically for optimum use with the 9000Pro. For a list of
the available Plug-in Voices created with the data on the included floppy
disk, see page 204.
See pages 64 and 100
for details.
Use these buttons to call up the Plug-in
Voices.
The Plug-in Voices area has 220
available spaces for voices. Voices can
be loaded from the included disk (using
the Plug-in Manager) or can be created
via the Plug-in Custom Voice creator
function (page 100).
Use this button to call up the
Board Voices. This allows you
to select any of the original
voices on the Plug-in Board.
See page 66
for details.
Load
Save
Plug-in Manager
41