Filter
Top Products
38
CVP-103
PAN
• Settings: L — — R
• Basic setting: (center)
PEDAL
• Settings: R (right only)
L (left only)
L+R (both)
• Basic setting: R
Playing Two Voices on Different Sides of the Keyboard — Split Mode
X Adjust the stereo position.
Use the data dial or [–] and [+] buttons to change the stereo position, or
hold down the PAN button to move the position to the right.
Press the [–] and [+] buttons simultaneously to restore the basic setting.
■ Setting the Stereo Position of the Left Voice.......................
The PAN function in the KEYBOARD [LEFT] display lets you ad-
just the stereo position of the left voice.
Z Press the PAN button.
➔ The PAN function is highlighted.
■ Setting the Range Affected by the Right and Left
Pedals.........................................................................................................................
The PEDAL function in the KEYBOARD [LEFT] display lets you
specify which ranges of the keyboard will be affected by the damper and
glide functions controlled by the left and right pedals when playing in
Split mode. Press the PEDAL button.
➔ The value changes each time you press the button.
See page 138 for a list of the functions
that can be controlled by the left pedal.
OCTAVE
• Settings: –2 (2 octaves lower)
–1 (1 octave lower)
0 (no octave shift)
+1 (1 octave higher)
+2 (2 octaves higher)
• Basic setting: +1
■ Setting the Octave of the Left Voice ..............................................
The OCTAVE function in the KEYBOARD [LEFT] display lets you
adjust the pitch of the left voice up or down by one or two octaves. Press
the OCTAVE button.
➔ The value changes each time you press the button.
Some voices have octave settings that
are selected automatically when the
voice is selected. (Such settings are not
displayed by the OCTAVE function.) You
can prevent the octave setting from
changing when a voice is selected by
setting the VOICE SETTING function
(page 137) to MANUAL.
36