Filter
Top Products
211
CVP-109/107/105/700
C Set the tuning.
LOAD See page 193.
SAVE See page 194.
DELETE See page 195.
NAME See page 195.
TUNE
• Range: -64 cent — +63 cent
• Basic Value: 0 (all keys)
Set the pitch by pressing the TUNE ▼ or ▲ buttons, or by using the
data dial or [–] and [+] buttons. You can play the key being tuned to
check the sound during this operation. The default tuning of ±0 cents
can be instantly recalled for the selected key by simultaneously press-
ing the TUNE ▲ and ▼ buttons.
V Repeat steps 2 and 3 until all the required keys have been tuned.
■ User Scale Files ...................................................................................................
The custom scale can be named and saved to disk as a user scale file.
User scale files can be loaded whenever necessary, or deleted when they
are no longer needed.
Z Insert a disk in the disk drive.
Make sure that a properly formatted disk has been inserted in the disk
drive before executing a file operation. If you want to load, delete, or
rename a user scale file, the inserted disk should contain the file in
question.
X Select the desired file operation.
Use the second LCD button from the right to select the desired file
operation: LOAD, SAVE, DELETE or NAME.
C Press the START button.
After the START button is pressed, the display corresponding to the
selected file operation appears.
The subsequent steps are the same as those explained on pages 193
through 195. Refer to the pages below, depending on the selected file
operation.
Utility
209