Filter
Top Products
Selecting & Playing Voices
N-100 Owner’s Manual
ENGLISH
18
Adding Variations to the Sound–Reverb
This control enables you to select four different types of reverb effect that add extra depth and
expression to the sound to create a realistic acoustic ambience.
Selecting a Reverb Type
While holding down the [PIANO/VOICE] button, press one of the C2–E2 keys
to select a reverb type.
Adjusting Reverb Depth
While holding down the [PIANO/VOICE] button, press one of the C3–G#4 keys
to adjust the reverb depth for the selected voice.
While holding down the [PIANO/VOICE] button, press the A4 key to set the
reverb to the depth most suitable for the selected voice.
Key Reverb Type Description
C2 Room This setting adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
C#2 Hall 1 For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates
the natural reverberation of a small-size concert hall.
D2 Hall 2 For a truly spacious reverb sound, use the HALL 2 setting. This effect sim-
ulates the natural reverberation of a large concert hall.
D#2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
C0 C1 C2 E2
Reverb depth range:
0 (no effect)–
20 (maximum depth)
NOTE
The depth value increases as you press higher keys.
C0 C1 C2 C3: Depth 0 C4 A4
G#4: Depth 20
The default reverb type (including
OFF) and depth settings are dif-
ferent for each voice.
NOTE