Filter
Top Products
Selecting & Playing Voices
N-100 Owner’s Manual
ENGLISH
19
Transposition
The N-100’s Transpose function makes it possible to shift the pitch of the entire keyboard up or
down in semitone intervals to facilitate playing in difficult key signatures, and to let you easily
match the pitch of the keyboard to the range of a singer or other instruments. For example, if you
set the transposition amount to “+5,” playing key C produces pitch F. In this way, you can play a
song as though it were in C major, and the N-100 will transpose it to the key of F.
Setting the amount of transposition
While holding down the [DEMO] and [PIANO/VOICE] buttons, press one of the
F#2–F#3 keys to set the desired amount of transposition.
To transpose the pitch down (in semitone steps)
While holding down the [DEMO] and [PIANO/VOICE] buttons, press any key
between F#2 and B2.
To transpose the pitch up (in semitone steps)
While holding down the [DEMO] and [PIANO/VOICE] buttons, press any key
between C#3 and F#3.
To restore the normal pitch
While holding down the [DEMO] and [PIANO/VOICE] buttons, press the C3
key.
Fine tuning of the Pitch
You can fine tune the pitch of the entire instrument. This function is useful when you play the N-
100 along with other instruments or CD music.
Setting the Pitch
To raise the pitch
(in steps of roughly 0.2 Hz):
Hold down the A-1 and B-1 keys
simultaneously and press any key
between C3 and B3.
To lower the pitch
(in steps of roughly 0.2 Hz):
Hold down the A-1 and A#-1 keys
simultaneously and press any key
between C3 and B3.
To restore standard pitch:
Hold down the A-1, A#-1 and B-1
simultaneously and press any key
between C3 and B3.
TERMINOLOGY
Transpose:
Changing the key signature. On
the N-100, transposing shifts the
pitch of the entire keyboard.
Transposition range:
F#2 (-6 semitones)–
C3 (normal pitch)–
F#3 (+6 semitones)
NOTE
0-1
-2 +1 +3-4
-3-5 +2+4+5
-6 +6
C0 C1 C2
F#2F#3
TERMINOLOGY
Hz (Hertz):
This unit of measurement refers to
the frequency of a sound and rep-
resents the number of times a
sound wave vibrates in a second.
Default setting:
The “Default setting” refers to the
factory setting obtained when you
first turn on the power to the N-
100.
Setting range: 427.0–453.0 Hz
Standard pitch: 440.0 Hz
NOTE
A-1 B-1 C3 B3
C2C1C0
C2C1C0
A-1 C3 B3
A#-1
C2C1C0
A-1 B-1 C3 B3
A#-1