Filter
Top Products
Keyboard Stand Assembly
N-100 Owner’s Manual
ENGLISH
26
Keyboard Stand Assembly
CAUTION
• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble the unit in the appropri-
ate sequence.
• Assembly should be carried out by at least two persons.
• Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Do not use any other
screws. Use of incorrect screws can cause damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of each unit.
• To disassemble, reverse the assembly sequence.
1. Lean A against the wall.
1-1Spread a large soft cloth such as a blanket on the
floor in front of the wall.
1-2Lay A on the soft cloth with its keyboard side fac-
ing toward you.
Have a Phillips-head (+) screwdriver ready.
Remove all parts from the box. Confirm that all parts shown in the illustration are provided.
A
B
CC
DD DD
6 x 20 mm long screws x4
6 x 16 mm short screws x12
AC power cord
(The shape of plug differs
depending on locale.)
• Before starting installation, remove the vinyl ties that bundle the pedal cord and AC power cord.
Front legFront leg
Pedal cord
Pedal box Speaker box
AA