Filter
Top Products
Selecting & Playing Voices
P-155 Owner’s Manual
ENGLISH
17
Combining Voices (Dual)
You can play voices simultaneously across the entire range of the keyboard. In this way, you can
combine similar voices to create a thicker sound.
1. Press two voice buttons at the same time (or press
one voice button while holding another) to engage
Dual.
The voice indicators of both selected voices will light when Dual is active.
Play the keyboard.
If you want to use a voice selected via the [STRINGS/OTHERS] button, press the
[STRINGS/OTHERS] button several times to call up the desired voice while
holding any other VOICE button. The number of the voice name of the
[STRINGS/OTHERS] button is displayed on screen.
According to the voice numbering priority shown in the diagram below, the
lower value voice number will be designated as Voice 1 (the other voice will be
designated as Voice 2).
The Function provides access to a number of other Dual functions, such as vol-
ume balance setting and octave setting (pages 39, 41). (If you do not set the
Dual functions, the appropriate setting will be set in each voice by default.)
2. Press any single voice button to return to the nor-
mal single-voice play.
2
1
Two voices in the [STRINGS/
OTHERS] button cannot be
engaged at the same time.
Dual and Split cannot be
engaged at the same time.
[REVERB] in Dual:
The reverb type assigned to
Voice 1 will take priority over the
other. (If the reverb is set to OFF,
Voice 2 reverb type will be in
effect.)
[EFFECT] in Dual:
Depending on the condition, one
effect type may take priority over
the other. The depth is deter-
mined according to the default
depth value of the voice combina-
tion. However, using function F3
(page 41) you can adjust the
depth value for each voice to your
liking.
NOTE
NOTE
NOTE
1 2 3 4 5 6 7
Voice numbering priority