Filter
Top Products
Detailed Settings – [FUNCTION]
P-155 Owner’s Manual
ENGLISH
39
Basic Procedure in Function
Follow the steps below to use the functions.
If you become lost while using a function, return to this page and read the basic procedure.
1. Press the [TEMPO/FUNCTION] button to enter the
Function.
The [FUNCTION] indicator lights.
2. Use the [TEMPO/FUNCTION –, +] buttons to select
the desired function from F1–F8.
When (that include the sub-functions) is selected, go on to step 3.
When F1 or F6 is selected (these have no sub-functions), go on to step 5.
3. Press the [+/YES] button to enter the sub-function.
4. Use the [TEMPO/FUNCTION –, +] buttons to select
the desired sub-function.
In the example below, the sub-functions of F4 (Split) are shown.
5.
Use the [–/NO] and [+/YES] buttons to change the
ON/OFF setting, select the type, or change the value.
The default setting (which is used when you first turn on the power to the
instrument) is recalled by pressing the [–/NO] and [+/YES] buttons simulta-
neously.
6.
Press the [TEMPO/FUNCTION] to exit the Function.
The [TEMPO] indicator lights.
1246
5
3
Functions cannot be selected
during Demo/PRESET/USER/USB
song playback or in the File Oper-
ation and Record modes.
To cancel the function in step 2, 3,
or 4, press the [TEMPO/FUNC-
TION –, +] button any time to exit
Function.
NOTE
NOTE
Desired function Sub- function
Desired
function
Sub-function
After you select the function, the
current setting will be displayed
when the [–/NO] or [+/YES] but-
ton is pressed for the first time.
NOTE