Filter
Top Products
Selecting & Playing Voices
P-155 Owner’s Manual
ENGLISH
19
3. Press a voice button to select a voice for the right
hand.
If you want to use a voice selected via the [STRINGS/OTHERS] button, press the
[STRINGS/OTHERS] button several times to call up the desired voice. The voice
number of the [STRINGS/OTHERS] button is displayed on screen.
4. Press the corresponding voice button while holding
the [SPLIT] button to select a voice for the left hand.
The indicator of the left voice button will light while the [SPLIT] button is
pressed.
If you want to use a voice selected via the [STRINGS/OTHERS] button, press the
[STRINGS/OTHERS] button several times to call up the desired voice while
holding the
[SPLIT] button. The voice number of the [STRINGS/OTHERS] but-
ton is displayed on screen.
5. Press the [SPLIT] button to return to the normal sin-
gle-voice play.
[REVERB] in Split
The reverb type assigned to the
right voice will take priority over
the other. (If the reverb is set to
OFF, the left voice’s reverb type
will be in effect.) Reverb depth
settings made via the panel con-
trols (i.e., pressing the [–/NO] or
[+/YES] buttons while holding the
[REVERB] button; see page 20)
will be applied to both voices.
[EFFECT] in Split
Depending on the conditions, one
effect type will take priority over
the other. The depth will be
decided according to the default
depth value of the voice combina-
tion. However, using Function F4
(pages 39, 42) you can change
the depth value for each voice as
you like. Effect depth settings
made via the panel controls (i.e.,
pressing the [–/NO] or [+/YES]
buttons while holding the
[EFFECT] button; see page 21)
will be applied to the right voice
only.
NOTE
NOTE