Filter
Top Products
Bank ‘File’ containing the current 8 Registrations that are stored to the 8
‘REGISTRATION MEMORY’ buttons.
9)
Use the
[1]
-
[8]
toggle buttons under the screen to name the Registration
Bank ‘File’.
10)
Press the
[8 ^]
'OK' button to save the Registration Bank ‘File’ into the
chosen memory location.
11)
To name the 8 individual Registrations contained in the Registration Bank
‘File’, do the following:
a)
Press the
[8 ^]
'EDIT' button.
b)
Press the
[1 v]
'NAME' button.
c)
Use the
[A]
-
[D]
and
[F]
-
[I]
buttons to select the desired Registration.
d)
Press the
[7 v]
'OK' button.
e)
Use the
[1]
-
[8]
toggle buttons under the screen to name the
Registration.
f)
Press the
[8 ^]
'OK' button to store the name.
g)
Press the
[8 v]
button to return to the 'REGISTRATION BANK' screen.
h)
Press the
[EXIT]
button repeatedly to return to the 'MAIN' screen.
Loading Registrations:
NOTE: The
‘REGISTRATION MEMORY’
button settings are cleared whenever
the unit is turned OFF. To load Registrations back in after the unit has been
turned ON (or to select a different Registration Bank), the following procedure
must be performed.
1)
Press the
[J]
'REGISTRATION BANK' button.
2)
Use the
[BACK]
and
[NEXT]
buttons to select a memory location ('USER'
or 'FLOPPY DISK') containing the desired Registration Bank ‘File’.
3)
Select the desired Registration Bank ‘File’:
a)
If Folders were first created, use the
[A]
-
[J]
buttons to select the
desired Folder, then the desired Registration Bank ‘File’.
b)
If Folders were not created, use the
[A]
-
[J]
buttons to directly select