Filter
Top Products
XV. Storing Intro and Ending Settings
Each Preset Style on the PSR1000/2000 has a specific Intro and Ending length
and type. The choices available for the Intro are 'CountIn', '4bar1', or '4bar2'. The
choices available for the Ending are 'Fill&Hit', '2bar', or '4bar'. These variations of
Intro and Ending may be changed temporarily from the front panel, or stored
permanently to User memory or Floppy Disk as a 'User Style'.
NOTE: The Intro and Ending settings are not stored as a Registration parameter,
and therefore cannot be stored to the 'REGISTRATION MEMORY' buttons; they
must be stored with a Style.
Changing Intro and Ending Settings Temporarily:
1)
Select a desired Style.
2)
From the 'MAIN' screen, press the
[E]
'INTRO ENDING' button.
3)
Use the
[D]
button to select the Intro setting.
4)
Use the
[E]
button to select the Ending setting.
5)
Press the
[EXIT]
button to return to the 'MAIN' screen.
Changing Intro and Ending Settings Permanently:
1)
Make the desired Intro and Ending settings (see steps above).
2)
Press the
[DIGITAL RECORDING]
button.
3)
Press the
[B]
'STYLE CREATOR' button.
4)
Use the
[BACK]
and
[NEXT]
buttons to display the 'ASSEMBLY' page.
5)
Press the
[J]
'SAVE' button.
6)
Use the
[BACK]
and
[NEXT]
buttons to select the 'USER' memory page or the
'FLOPPY DISK' page.
7)
Press the '7'
[v]
'SAVE' button.
8)
Use the '1' - '8'
[^]
and
[v]
toggle buttons to name the edited Style.
9)
Press the '8'
[^]
'OK' button to save the Style to the memory location chosen in
step 6.
Owner's Manual, p. 66, 112-113