Filter
Top Products
XIV. Some Settings are not Storing with the Registrations
Settings that are saved with a Registration can be 'filtered' by the user via the
'REGISTRATION MEMORY CONTENTS' screen. If something is not saving with
a Registration, it is possible that that type of setting has not been selected to be
saved with the Registration Memory. The user should also check the Parameter
Chart on p. 25-30 in the PSR1000/2000 Data List booklet to verify that the
desired settings can be saved with a Registration.
Selecting Settings to be Saved with a Registration:
1)
Press the
[MEMORY]
button to display the 'REGISTRATION MEMORY
CONTENTS' screen.
2)
Using the '5'
[^]
and
[v]
toggle buttons, select a desired Group of settings.
3)
Using the '8'
[^]
and
[v]
toggle buttons, put a check mark next to the selected
Group to be saved.
4)
Repeat steps 2 - 3 for other desired setting Groups.
5)
If something is still not storing with a Registration, check the Parameter Chart
on p. 25-30 in the PSR1000/2000 Data List booklet to make sure that it is a
setting which can be saved with a Registration.
Owner's Manual, p. 84
Data List, p. 25-30