29
MIDI DATA FORMAT
<UNIVERSAL NON-REALTIME MESSAGES>
1) ID Request Receive only.
F0H, 7EH, xnH, 06H, 01H, F7H
xn : n=Device Number, xn=7F : Broadcast
2) ID Reply Send only.
F0H, 7EH, 0nH, 06H, 02H, 43H, 00H, 41H, 0CH, 02H,
00H, 00H, 00H, 02H, F7H
0n : n=Device Number
When an ID Request is received, an ID Replay is sent.
<PARAMETER CHANGE>
[VL70-m Native Format]
F0H, 43H, 1nH, 57H, ahH, amH, alH, ddH, ~, ddH, F7H
1n : n=Device Number
ah : Address High
am : Address Mid
al : Address Low
dd : Data
1)
Sound Module Mode Receive only.
See <Table 1>.
2) System Parameter See <Table 3>.
3)
Current Voice / Common Misc Parameter
See <Table6>.
4)
Current Voice / Common Part Parameter
See <Table 7>.
When this message is received in the Voice Mode, the
Part Number is fixed to 1.
When this message is received in the VL-XG Mode, the
Part Number is ignored.
5)
Current Voice / Common Effect Parameter
See <Table 8>.
6) Current Voice / Element Parameter See <Table 9>.
7) Remote SW Receive only. See <Table 12>.
[VL-XG Format]
F0H, 43H, 1nH, 4CH, ahH, amH, alH, ddH, ~, ddH, F7H
1n : n=Device Number
ah : Address High
am : Address Mid
al : Address Low
dd : Data
1) XG System On Receive only. See <Table 2>.
2) System Parameter See <Table 3>.
3) Display Data Receive only. See <Table 5>.
4)
Current Voice / Common Part Parameter
See <Table 7>.
When this message is sent, the established Part Number
is used.
When this message is received in the Voice Mode, the
Part Number is fixed to 1.
When in the VL-XG mode, this message can be received
if the Part Numbers are in agreement.
5)
Current Voice / Common Effect Parameter
See <Table 8>.
[Other]
1) MIDI Master Tune Receive only.
F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mmH, llH, ccH, F7H
1n : n=Device Number
mm : Master Tune MSB
ll : Master Tune LSB
cc : Don’t care
When received, the System Parameter will reflect the Master
Tune.
<PARAMETER REQUEST>
F0H, 43H, 3nH, 57H or 4CH, ahH, amH, alH, F7H
3n : n=Device Number
ah : Address High
am : Address Mid
al : Address Low
Receive only.
The corresponding Parameter Changes other than those that
are marked “Receive only” are transmitted.
In the Voice Mode, Model ID = 57H is transmitted, in the VL-
XG Model ID = Channel 4 is transmitted.
<BULK DUMP>
[VL70-m Native Format]
F0H, 43H, 0nH, 57H, bmH, blH, ahH, amH, alH, ddH, ~, ddH,
ccH, F7H
0n : n=Device Number
bm : Byte Count MSB
bl : Byte Count LSB
ah : Address High
am : Address Mid
al : Address Low
dd : Data
cc : Check Sum
1) System Parameter See <Table 3>.
2)
Current Voice / Common Misc Parameter
See <Table 6>.
3)
Current Voice / Common Part Parameter
See <Table 7>.
When this message is transmitted, the Part Number is
fixed to 1.
When this message is received in the Voice Mode, the
Part Number is fixed to 1.
When this message is received in the VL-XG Mode, the
Part Number is ignored.
4)
Current Voice / Common Effect Parameter
See <Table 8>.
5) Current Voice / Element Parameter See <Table 9>.
6) Custom Voice Parameter See <Table 10>.
7) Internal Voice Parameter See <Table 11>.