Filter
Top Products
Detailed Settings — [FUNCTION]
Owner’s Manual
44
ENGLISH
Basic Procedure in Function
Follow the steps below to use the functions.
(If you become lost while using a function, return to this page and read the basic procedure.)
1. Engage the Function mode.
Press the [TEMPO/FUNCTION] button so that its [FUNCTION] indicator lights.
will appear on the display. (The indication of “
✽
.
✽
” varies depending on
the status of the unit and usage.)
2. Select a function.
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select the desired function from
F1 – F7.
When (that include the sub-mode) is selected, go on to step 3.
When F1 or F5 is selected (these have no sub-mode), go on to step 5.
3. Press the [+/YES] button to enter the sub-mode.
4. Select a sub-mode.
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select the desired sub-mode.
5. Use the [–/NO] and [+/YES] buttons to change the
ON/OFF setting, select the type, or change the
value.
The default setting (which is used when you first turn on the power to the
instrument) is recalled by pressing the [–/NO] and [+/YES] buttons simulta-
neously.
6.
Press the [TEMPO/FUNCTION] to exit the Function.
The [TEMPO] indicator lights.
3 5
1246
Procedure
NOTE
Functions cannot be selected
during Demo/Song Select/ file
operation mode or when the user
song recorder is in operation.
NOTE
To exit the Function mode, press
[FUNCTION] button any time.
Desired function Sub-mode
Desired function
Sub-mode
NOTE
After you select the function, the
current setting will be displayed
when the [–/NO] or [+/YES] but-
ton is pressed for the first time.