Filter
Top Products
Detailed Settings – [FUNCTION]
Owner’s Manual
50
ENGLISH
However, the backup settings themselves, the contents of
the user song recorder memory and character code set-
tings are always backed up.
You can turn the backup function on or off for
each function group (each of the following
sub-mode functions).
1. Engage the Function mode and select .
2. Press the [+/YES] button to engage the
backup function’s sub-mode, then use the
[TEMPO/FUNCTION ▼, ▲] buttons to select
the desired sub-mode.
Press the [–/NO] or [+/YES] button to turn the
backup function on or off.
Sub-mode
F7.1: Voice
F7.2: MIDI
F7.3: Tuning
F8.4: Others
Setting range: ON/OFF
Normal setting: Vo i ce: OFF
MIDI – Others: ON
Description of sub-modes
F7.1: Voice
•Voice (Keyboard, Dual)
•Dual (ON/OFF, Voice, and Dual Functions for each
voice combination)
•Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each voice)
•Touch Sensitivity (including the FIXED volume)
•Metronome (Beat, Volume < settings>)
F7.2: MIDI
The MIDI functions ( settings)
(expect for the and )
Tuning
•Transpose
•Tuning ( settings)
• Scale (including base note) ( settings)
F9.4: Others
•Other functions ( settings)
• BRILLIANCE setting
•DAMPER RES. ON/OFF and Depth
If the song cannot be loaded, you may need to change the
character code setting.
Setting range: Int (English)/JA (Japanese)
Normal setting: Int
F7.
Backup Functions
TERMINOLOGY
Backup:
You can back up some settings, such as voice selection and reverb
type, so that they will not be lost when you turn off the power to the
instrument.
If the backup function is turned on, the settings at power off are
effective. If the backup function is turned off, the settings in memory
are erased when you turn off the power. In this case, when you turn
on the power to the unit, the default settings (the initial settings) will
be used. (The factory setting default list is found on page 65.)
F7.5
Character Code