Filter
Top Products
As shown in the illustration above, a patch of the 1010
contains parameters for the five types of effect modules
and the patch level settings. In the Edit mode, you can call
up any of these parameters and change them.
1.Select the desired patch in the Play mode (from the
USER group or the PRESET group).
For details on how to select a patch, please refer to page 4.
2.Press the EDIT key.
The 1010 is now in the Edit mode. The flashing module
indicator shows which effect module is selected for
editing, and the flashing parameter indicator shows which
parameter within the module is selected for editing.
3.Pressing the EDIT key once more returns the 1010 to
the Play mode.
In the Edit mode, the following information is shown.
(1) Effect module on/off
The module cursor indicators of effect modules which are
ON in the selected patch are lit.
(2) Parameter type
The type of the parameter currently selected for editing is
indicated by the cross point of the flashing module cursor
indicator and parameter cursor indicator.
(3) Parameter value
The value of the parameter currently selected for editing is
shown on the display.
1.Press the EDIT key to activate the Edit mode.
2.Use the MODULE SELECT key to select the effect
module you wish to edit.
Editing a Patch
Panel display in Edit mode
NOTE
Activating Edit Mode
7
Creating a Patch (Edit Mode)
INPUT
Patch
COMP&WAH
1 COMPRESSOR & WAH 1 EQUALIZER
AMP SIM
1 CHORUS
2 FLANGER
3 DOUBLING
1 HALL
2 ROOM
3 DELAY
1 RHYTHM
2 Classic OD
3 Valve OD
4 Vintage DRIVE
5 DRIVE Master
6 FUZZ
7 Power LEAD
8 METAL T
9
10
11
12
13
14
15
16
DISTORTION EQ CHO/FLG REV/DLY
OUTPUT
PATCH LEVEL
FP01FP01
PARM
1
SENS
0-10
ATTACK
0-10
GAIN
1-16
TONE
0-10
ZNR
0-5
HIGH
0-(5)-10
PRESENCE
0-(5)-10
MID
0-(5)-10
LOW
0-(5)-10
DEPTH
0-10
1:CHO
3:DBL 3:DLY
2:FLG
1:HALL
2:ROOM
REV/DLYCHO/FLG
DISTORTION EQ VOL
RATE
TUNER
1-20
FEEDBACK
0-10
TIME
1-10
TONE
0-10
TIME
0-42(
x
10mS)
FEEDBACK
0-10
MIX
0-10
TONE-WAH
0-10-P1-P5
PATCH LEVEL
0-30
PARM
2
PARM
3
PARM
4
COMP
WAH
CHO
FLG
DIST EQ
REVERB
DELAY
DIST COLOR
1-16
WAHCOMP
BANK PATCH
BOTH WAH ON
(3)
(2)
(1)
1-20
RATE
TONE
0-10
MID
0-(5)-10
TONE
0-10
FEEDBACK
0-10
TONE-WAH
0-10-P1-P5
1-20
RATE
1:CHO
3:DBL
2:FLG
FEEDBACK
0-10
0-10
DEPTH
DIST COLOR
1-16
1-20
RATE
▲