22 CHAPTER 2: INSTALLING THE SWITCH
procedura di manutenzione, leggere le informazioni di sicurezza riportate
nell'Appendice A della presente guida per l'utente.
Package Contents ■ Switch unit
■ CD-ROM
■ Getting Started Guide (this guide)
■ Management Quick Reference Guide
■ Release Notes
■ Warranty Information
■ Power Adapter
■ Console Cable (RJ-45 to RS-232)
■ Stacking Clip
■ 4 x Rubber feet
Choosing a Suitable
Site
The Switch is suited for use on a desktop, either free standing, stacked
together with other units using the stacking clip, or mounted on a wall.
Alternatively, the Switch can be placed in a wiring closet or equipment
room, as an aggregator for other Hubs and Switches. A stacking kit
containing one mounting clip is supplied with the Switch.
CAUTION: Ensure that the ventilation holes are not obstructed.
When deciding where to position the Switch, ensure that:
■ Cabling is located away from:
■ sources of electrical noise such as radios, transmitters and
broadband amplifiers.
■ power lines and fluorescent lighting fixtures
■ The Switch is accessible and cables can be connected easily.
■ Water or moisture cannot enter the case of the Switch.
■ Air flow is not restricted around the Switch or through the vents in the
side of the Switch. 3Com recommends that you provide a minimum of
25mm (1in.) clearance.
