Configuring the 3C882 ISDN Modem for a Macintosh Computer 4-11
Figure 4-12 Configuration to ring both ports simultaneously
To change the voice call routing setting:
1 Specify which Phone port should handle the calls
associated with Telephone Number 1.
2 If your ISDN line has two telephone numbers, specify
which Phone port should handle the calls associated with
Telephone Number 2.
3 Click the Update Configuration button to download the
change to your 3C882 ISDN modem’s S register.
Verifying the Configuration
Check the status bar located toward the bottom of the
Configuration dialog box to verify correct configuration. If the
parameters were configured accurately and the 3C882 ISDN
modem is ready to send and receive calls, the status bar
fields will appear as shown here.
The TEI number(s) are not configured by the user. The TEI
number(s) are provided by the telephone company for
informational purposes only.
■ Layer 1: UP
■ SPID 1: Init (if required)
