6-4 CHAPTER 6: SUPPLEMENTARY VOICE FEATURES
Call Drop
Call Drop allows you to remove the last caller to a
conference. After a conference call has been established,
simply press and release the flash hook button to drop the
last caller added. See S register 79 in Appendix B for more
Call Drop information.
Call Transfer
Call Transfer is a voice call feature that allows you to transfer
a call to a third party. This feature can be used whether you
have received or have placed the first call.
Abort the second dial and switch
back to the first call?
If the dialed party is busy, press and release the switch
hook button to cancel the call and reconnect you to
the first call.
If you dialed a wrong number, or the far end does not
answer, hang up the phone to abort the attempted
call. The phone will then ring, indicating that the first
call is on hold. Answer the phone to reconnect you to
the first call.
What if I hear a dial tone when I
attempt to conference all three
parties?
A dial tone indicates that one of the parties has
dropped their call. Press and release the switch hook
button to return to the previously active call. You can
then conference a third party as described previously.
What if the telephone rings after
I hang up?
While you try to conference a call, the active call will
be put on hold to allow you to dial a new call. If you
hang up the phone before the call is connected, the
telephone will ring to let you know that you still have
a call on hold. The call on hold will be disconnected in
6 seconds if the call is not answered.
Table 6-2 How to Use Call Conference
How Do I Do This
Table 6-3 How to Use Call Transfer
How Do I Do This
Place a new call? While the first call is active, press and release the
switch hook button, wait for the dial tone, and then
dial a third party number.
After the third party has answered, press and release
the switch hook button to conference all three parties,
and then hang up the telephone to transfer the call.
