3 — OPERATION
3-3
BOOM IN/OUT Selector Switch
Holding the BOOM IN/OUT selector switch in the OUT position extends the boom out.
Holding the selector switch in the IN position retracts the boom. The in or out boom
motion continues until the selector switch is released, or the boom reaches a hard stop or
a safe travel limit.
BOOM FAST/SLOW Selector Switch
The BOOM FAST/SLOW selector switch controls the speed of the selected boom
motion. Generally, the switch is set on FAST to position the boom in the general
proximity of the work area. Then, the switch is set on SLOW to fine tune the position of
the boom to get closer to the work area.
ROTATION CW/CCW Selector Switch
Holding the ROTATION CW/CCW selector switch in the CW position enables the boom
to rotate in the clockwise direction. Holding the selector switch in the CCW position
enables the boom to rotate in the counterclockwise direction.
OUTRIGGERS Indicator
The OUTRIGGERS indicator lights up when the boom outriggers are properly deployed
and the boom weight is removed from the trailer axle.
