SERVSELECT IP VM INSTALLER/USER GUIDE
34
4.8 Managing target device tasks using the OSD
interface
From the Commands window, you can manage the switching system and user
connections, enable the Scan and Broadcast modes, and update the firmware.
To access the Commands window, complete the following steps:
1. Press Print Screen. The Main window opens.
2. Click Commands. The Commands window opens.
Figure 4-13. Commands window
Commands to manage routine tasks for the target device
Feature Purpose
SAM Status View the version and upgrade status of the SAM.
Display Config View current display settings.
Run
Diagnostics
Configure and begin diagnostics on target devices.
Broadcast
Enable
Begin broadcasting to the target devices. Configure a target
device list for broadcasting under the Setup window.
Scan Enable
Begin scanning the target devices. Set up a target device list
for scanning in the Setup window.
User Status View and disconnect users.
Display
Versions
View version information for the appliance as well as view and
upgrade firmware for individual SAMs.
Device Reset Re-establish operation of the keyboard and mouse.
