SERVSELECT IP VM INSTALLER/USER GUIDE
36
Figure 4-15. Upgrade window
To upgrade firmware, complete the following steps:
1. Press Print Screen. The Main window opens.
2. Click Commands > Display Versions > Upgrade. The Upgrade window opens.
3. Click Upgrade. A Warning window opens. Clicking OK opens the Upgrade Process
window. The progress of the upgrade is indicated in the Programmed field.
Viewing the display configuration
Use the Display Configuration window to view the current configuration of the switching
system.
To view the current configuration, click Commands > Display Config. The Display
Configuration window opens and lists the current system configuration values.
Viewing and disconnecting user connections
You can view and disconnect users from target devices through the User Status window.
The user (U) is always visible; however, you can display either the target device name or
eID number to which a user is connected. If there is no user currently connected to a
channel, the User and Server Name fields are blank.
