724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 55
LGB5028A User‘s Manual
Chapter 6: Configuration
Figure 6-10. The ACL Status screen.
Parameter Description
User: Indicate the ACL user.
Ingress Port: Indicate the ingress port of the ACE. Possible values are:
Any: The ACE will match any ingress port.
Policy: The ACE will match ingress ports with a specific policy.
Port: The ACE will match a specific ingress port.
Frame Type: Indicate the frame type of the ACE. Possible values are:
Any: The ACE will match any frame type.
EType: The ACE will match Ethernet Type frames.
NOTE: An Ethernet-type-based ACE will not get matched by IP and ARP frames.
ARP: The ACE will match ARP/RARP frames.
IPv4: The ACE will match all IPv4 frames.
Action: Indicate the forwarding action of the ACE.
Permit: Frames matching the ACE may be forwarded and learned.
Deny: Frames matching the ACE are dropped.
Rate Limiter: Indicate the rate limiter number of the ACE. The allowed range is 1 to 16.
When “Disabled” is displayed, the rate limiter operation is disabled.
Port Copy: Indicate the port copy operation of the ACE. Frames matching the ACE are copied to the port number. The allowed
values are “Disabled” or a specific port number. When “Disabled” is displayed, the port copy operation is disabled.
Mirror: Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is “Disabled.”
CPU: Forward the packet that matched the specific ACE to CPU.
CPU Once: Forward the first packet that matched the specific ACE to CPU.
Counter: The counter indicates the number of times the ACE encountered a frame.
