724-746-5500 | blackbox.com
Page 60
LGB5028A User‘s Manual
724-746-5500 | blackbox.com
Chapter 6: Configuration
Reset: Click to undo any changes made locally and revert to previously saved values.
System Status
When you set the LACP function on the switch, system status provides a status overview for all LACP instances.
Web Interface
To display the LACP System status in the Web interface:
1. Click “Configuration,” “LACP,” “System Status.”
2. If you want to auto-refresh the information, click on the “Auto-refresh” button.
3. Click “Refresh” to refresh the LACP System Status.
Figure 6-13. The LACP System Status screen.
Parameter Description
Aggr ID: The Aggregation ID associated with this aggregation instance. For LLAG the ID is shown as “isid:aggr-id” and for
GLAGs as “aggr-id.”
Partner System ID: The system ID (MAC address) of the aggregation partner.
Partner Key: The key that the partner has assigned to this aggregation ID.
Last Changed: The time since this aggregation changed.
Local Ports: Shows which ports are part of this aggregation for this switch. The format is: “Switch ID:Port.”
Auto-refresh: Click on this button to refresh the information automatically.
Upper right icon (Refresh): You can click to refresh the LACP System status information manually.
Port Status
When you complete setting the LACP function on the switch, it provides a Port Status overview for all LACP instances.
Web Interface
To display the LACP Port status in the Web interface:
1. Click “Configuration,” “LACP,” “Port Status.”
2. To auto-refresh the information, click on the “Auto-refresh” button.
3. Click “Refresh“ to refresh the LACP Port Status.
