3.4 SPECIFYING INTERCOM SETTINGS
You can specify intercom-related parameters using the ‘Settings’ menu. The
‘Settings’ menu is accessed from the main window, and has two options:
• Ring Tone
• Intercom Activity
Ring Tone
This option allows you to enable or disable an audible tone that sounds
every time an intercom call is made to the operator. The default state is
‘enabled’. To disable the tone:
• Select the ‘Settings’ menu and click on ‘Ring Tone’.
The tick mark (√) will subsequently disappear, indicating that the ring tone
has been disabled.
To turn the ring tone back on:
• Select the ‘Settings’ menu and click on ‘Ring Tone’ again.
The tick mark (√) will subsequently appear, indicating that the ring tone
has been enabled again.
Logging intercom activity
This option allows you to enable or disable the logging of all intercom
activity. You can also specify the name of the file where logging information
will be stored. To do so:
• Select the ‘Settings’ menu and click on ‘Intercom Activity’.
PREPARING FOR A CONFERENCE
Intercom Digital Congress Network
Software User Manual Page 3-16
3
