Chapter 8 Profile and Web Page Parameters and Defaults
Call Preference Parameters
8-14
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Table 8-3 Call Preference Parameters
Parameter Description
Allow Call Waiting
(on web page)
CallWaiting
(in profile)
Whether the call waiting feature is enabled on a phone.
• 0=Disable the call waiting feature.
• 1=Enable the call waiting feature.
Value type: Boolean.
Default value: 1
Allow Call Transfer
(on web page)
AttendedTransfer
(in profile)
Whether the call transfer feature is enabled on a phone. If this feature is
enabled, the Trnsfer softkey will appear when appropriate, allowing a user to
transfer a call. If this feature is disabled, this softkey will never be available.
• 0=Disable the call transfer feature.
• 1=Enable the call transfer feature.
Value type: Boolean.
Default value: 1
Allow Blind Transfer
(on web page)
BlindTransfer
(in profile)
Whether the blind call transfer feature is enabled on a phone. If this feature is
enabled, the BlndXfr softkey will appear when appropriate, allowing a blind
transfer of a call. If this feature is disabled, this softkey will never be available.
• 0=Disable the blind call transfer feature.
• 1=Enable the blind call transfer feature.
Value type: Boolean.
Default value: 1
Allow Conference
(on web page)
Conference
(in profile)
Whether the conference feature is enabled on a phone. If this feature is
enabled, the Confrn softkey will appear when appropriate, allowing a
three-way conference to be established. If this feature is disabled, this softkey
will never be available.
• 0=Disable the conference feature.
• 1=Enable the conference feature.
Value type: Boolean.
Default value: 1
