Chapter 8 Profile and Web Page Parameters and Defaults
Call Preference Parameters
8-20
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
GUI Set Mask
(on web page)
CallPrefGuiSet
(in profile)
Specifies which parameters on the Call Preferences menu on the phone can be
changed by an end user.
Set a bit to 0 if an end user should not be able to change the corresponding
parameter. Set the bit to 1 if an end user should be able to change the parameter.
• Bit 0: Do Not Disturb.
• Bit 1: Allow Call Waiting.
• Bit 2: Block Caller ID.
• Bit 3: Call Forward Number.
• Bits 4–5: Reserved.
• Bit 6: Display Name.
• Bit 7: Time Format.
• Bit 8: Date Format.
• Bit 9: Voice Mail Number.
• Bit 10: Allow Call Transfer.
• Bit 11: Allow Blind Transfer.
• Bit 12: Allow Conference.
• Bit 13: Short Name.
• Bit 24: Block Anonymous Call.
• Bit 25: Reserved.
• Bit 26: Forward to Voice Mail Delay.
Value type: Bitmap.
Default value: 0xFFFFFFFFparameters:network<$startrange>
Table 8-3 Call Preference Parameters (continued)
Parameter Description
