4-11
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Chapter 4 Basic and Additional SIP Services
Additional SIP Services
To configure a Cisco IP Phone for calls that do not use a SIP proxy, set the
following parameters to the values shown:
To place an IP call, dial the telephone number and the IP address of the remote
user agent using this format:
phone_number**IPaddress
Use the star (*) key on the telephone keypad to represent the dot (.) in an IP
address. If you are using on-hook dialing, press the Dial softkey to terminate the
dial string and place the call. If you are using off-hook dialing, press the pound
(#) key on the telephone keypad to terminate the dial string and place the call
Note URL dialing is not supported.
For example, to place a call to a user agent with an ID of 408-555-1212 at IP
address 192.168.1.100, enter the following string on your telephone keypad:
4085551212**192*168*1*100
Related Topics
• Chapter 5, “Configuring the Cisco IP Phone Models 7905G and 7912G Using
the Phone Menus,”
• Chapter 6, “Configuring the Cisco IP Phone Models 7905G and 7912G Using
a TFTP Server,”
• Chapter 7, “Configuring the Cisco IP Phone Models 7905G and 7912G
Using Web Pages.”
• Chapter 8, “Profile and Web Page Parameters and Defaults.”
Parameter on SIP
Configuration Menu
Parameter in Profile
or on Web Page Setting
SIP Proxy Proxy 0 (zero) or No
User ID UID Telephone number of the
phone
Register with Proxy SipRegOn 0 (zero) or No (disables SIP
registration with a SIP proxy
server)
