19 – 8
Vission 20/20 • Operation and Service Manual •Vilter/Emerson • 35391SC 1.8.5153
Figure 19-5. Confi guration Screen - Page 5
Analog Outputs
The Vission 20/20 has several Analog outputs that the
operator can choose how the outputs will be used. Once
an output is enabled, the Auxiliary I/O screen will be
available from the menu screen where the operator can
further defi ne the outputs operation, see Figure 19-5.
Confi guration Screen - Page 5.
Enable Output #:
• Enables the selected analog output.
Set Name:
• Allows the operator to assign a name to the output.
Digital Outputs
The Vission 20/20 has several Digital outputs that the
operator can choose how the output will be used. Once
an output is enabled, the Auxiliary I/O screen will be
available from the menu screen where the operator can
further defi ne the outputs operation, see Figure 19-5.
Confi guration Screen - Page 5.
Enable Output #:
• Enables the selected digital output.
Set Name:
• Allows the operator to assign a name to the output
Section 19 • Configuration
