C1624M-F (9/07) 47
PRESETS
A preset allows you to direct a PTZ (camera positioning system) to move to a predetermined scene (such as a door) on keyboard command or as a
result of an alarm. The area is programmed (set) in advance (pre). In addition to moving the camera, a descriptive title can appear in the video
pane. The type of camera positioning system determines the number of presets available.
Recording a preset
Use PTZ controls to move the camera to the preset position you want to record.
1. Right-click in the video pane of the desired camera. A shortcut menu appears.
2. Click Preset and then select Modify Preset. The Select Preset dialog box appears.
Figure 50. Selecting a Preset
3. Enter the number of the preset you want to modify, and then click OK.
Activating a preset
1. Right-click in the video pane of the desired camera, and then click Preset. The Select Preset dialog box appears (Figure 50).
2. Enter the number of the preset you want to activate, and then click OK.
Deleting a preset
1. Right-click in the video pane of the desired camera.
2. Click Preset, Delete Preset. The Delete Preset dialog box appears.
3. Enter the number of the preset you want to delete, and then click OK.
Figure 51. Deleting a Preset
