A SERVICE OF

logo

6Ć30 Removal and Replacement
C4699Ć90000
7 Remove the engaging lever.
8 Remove the spring from the bailĆgear
assembly.
9 Loosen the screw from the top of the
bailĆgear assembly.
Torx-8
10 Remove the screw from the plastic bail
gear.
You may need to hold the bail cam steady
inside the sideĆplate at the same time. Y ou
can access the cam through the hole
underneath the sideĆplate.
Torx-15
11 Pull the bail gear assembly out from the
plotter.
The cam falls to the floor of the plotter.