A SERVICE OF

logo

6Ć35 Removal and ReplacementC4699Ć90000
5 Pull the top of the carriage up.
6 Disconnect the trailing cable from the
connector on the carriage.
7 Release the trailing cable from the clips
on the trailingĆcable guide, and remove
the trailing cable from the plotter.
Repositioning the Trailing Cable
IMPORTANT
When you reinstall the trailing cable, make
sure that you position it under
the plastic
tabs at the back of the carriage cover, and not
above them.
Trailing cable
under tabs !
Otherwise, the plotter will not be able to load
media.