Care of the Printer
Installing Expansion
Cards
Specifications Ordering Accessories Glossary
Media & InkIntroduction Front Panel Other
Printer
Options
Index
Solutions
6. Insert the LAN cable into the LAN card. It is
simply pushed into place and clicks when
locked.
7. Carefully replace the plastic cover by clipping
it back into place:
• Put the two hinge clips on the side that
has the edge cable-hole into their slots.
• Swivel the cover in the direction opposite
to the embossed arrow and clip the other
two tabs on the opposite side into their
slots. Ensure that the LAN cable passes
correctly through the edge cable-hole
(shown by the yellow arrow).
• Take care to carefully route the LAN cable
so it does not interfere with the spindle or
roll.
8. Once you have completed the physical installation of the card you will have to configure it for
you LAN, see Setting up the I/O Card
.
Previous …
HP JetDirect Network Card Installation (Continued)
