Appendix A Specifications 341
Paper Specifications
Labels
Note For best results, use only Tray 1 and the Face-up Bin.
CAUTION To avoid damaging the printer, use only labels recommended for use in
laser printers.
Never print on the same sheet of labels more than once.
Label Construction
When selecting labels, consider the quality of each component:
z Adhesives: The adhesive material should be stable at 392° F (200° C), the
printer’s maximum temperature.
z Arrangement: Only use labels with no exposed backing between them.
Labels can peel off sheets with spaces between the labels, causing serious
jams.
z Curl: Prior to printing, labels must lie flat with no more than 0.5 inch
(13 mm) of curl in any direction.
z Condition: Do not use labels with wrinkles, bubbles, or other indications of
separation.
To print sheets of labels, see page 124
.
