A SERVICE OF

logo

3-66 Troubleshooting Analysis Guide (TAGs)
6
Turn off the printer and unplug the power cord.
Disconnect P26 and P40.
Check P26-1 to P40-2 for continuity.
Is there continuity?
No: Repair or replace the connectors or wiring from P26-1 to P40-2, then turn to TAG 002:
Check & Problem Resolution.
Yes: Repair or replace the erase lamp assembly. If this resolves the problem, turn to TAG 002:
Check & Problem Resolution. If this does not resolve the problem, replace the PCL
board, turn to TAG 002: Check & Problem Resolution.