
(014 intentionally excluded)
5-16 Diagnostic Tests
018 Duplex Clutch Test Sequence
1 Go to: 018
2 Press: READY to run the test. The first flipper engages, accompanied by a continuous
clicking sound, and “7-0” appears on the display.
3 Press: READY to activate the next clutch or flipper. Listen for the clicking sound as it
engages. The number on the display changes to indicate the next clutch or flipper. The
display codes and the clutch or flipper they represent are listed in the following chart.
4 To check a specific clutch or flipper, press READY repeatedly until the code on the
display corresponds to the item you want to check. Manually activate the sensor. Con-
firm that the display changes when you activate the sensor.
These codes may indicate specific error conditions:
5 Press: STOP to exit.
Table 5-18. Duplex Clutch Test Displays
Display Indication
7-0 Duplex exit flipper
7-1 Duplex roller clutch A
7-2 Duplex re-entry flipper
7-3 Duplex roller C solenoid
Table 5-19. Duplex Clutch Test Error Displays
Display Indication
069 Duplex is not installed.
090 Cover is open. Close cover.