A SERVICE OF

logo

Open as PDF
next previous
Installation and Options 2-7
Refer to Figure 2-6 and follow these steps to add or remove memory.
1. Review the memory configuration and guidelines.
2. Remove the cover (see Section 2.3.1).
3. To insert a memory DIMM
, slide it into the appropriate memory slot
and press down gently but firmly to engage the side tabs
.
4. To remove a memory DIMM, disengage the side tabs and lift it out from the
slot.
Figure 2-6 Adding or Removing Memory
1
2
3
3
MR0097