Option 2
Alternatively, you may also configure the printer on the
network by using the HP JetDirect CD-ROM’s installation utility:
1. Insert the HP JetDirect CD-ROM into your CD-ROM drive. If
the installation program does not run automatically, access
File Manager.
2. Select Set up Network Printer and follow the instructions
on the screen.
4.2.2 Queue Server Mode on NetWare 4.11 Bindery Networks
Step 1 – Install HP JetAdmin
1. Insert the HP JetDirect CD-ROM into your CD-ROM drive. If
the installation program does not run automatically, access
File Manager or Explorer and run SETUP.EXE on the CD-ROM.
2. Select the option to install JetAdmin and follow the
instructions on the screen.
Step 2 – Configure the JetDirect Print Server
1. Log onto the network with Supervisor privileges at any user
workstation.
2. Click Start, Programs, HP JetAdmin Utilities, and HP
JetAdmin to run HP JetAdmin.
3. The following message may be displayed: “JetAdmin could
not find any configured devices on your network. Do you
want to configure one now?”
Click Yes and proceed to step 5. (If this message is not
displayed, go to step 4.)
4. On the HP JetAdmin Utility screen, press [F5] to refresh the
list of printers. All configured print servers are displayed.
Select Device, New.
5. On the New Device screen, highlight the LAN hardware
address of your print server. (The 12-character hardware
address is on the HP JetDirect configuration page.) See
section on printing configuration page.
6. Click Configure. A General screen is displayed.
7. Type the name of the print server and a description
(optional): then click Next. A NetWare configuration screen
is displayed.
8. Click Operating Mode and select Queue Server Mode.
