9. Click Queues and then click Change.
10. Select your NetWare server from the list and click Create.
11. Type a name for this printer queue in the Create Queue
screen and click OK.
12. Click Yes to add the queue to the list of serviced queues.
13. Your configured queues are displayed under Serviced
Queues, Click OK.
14. Follow the instructions to complete configurations.
4.2.3 Queue Server Mode on NetWare 3.12 or 4.11 NDS Networks
Step 1 – Install HP JetAdmin
1. Insert the HP JetDirect CD-ROM into your CD-ROM drive. If
the installation program does not run automatically, access
File Manager or Explorer and run SETUP.EXE on the CD-ROM.
2. Select the option you desire and follow the instructions on
the screen.
Step 2 – Configure Print Server
1. Log onto the network with Supervisor privileges at any user
workstation.
2. For Windows for Workgroups 3.11, double-click the HP Jet
Admin Utilities group.
For Windows 95, 98 and NT 4.0, Click Start, Programs, HP
JetAdmin Utilities, and HP JetAdmin to run HP JetAdmin.
3. The following message may be displayed: “JetAdmin could
not find any configured devices on your network. Do you
want to configure one now?”
Click Yes and proceed to step 5. (If this message is not
displayed, go to setp 4.)
4. On the HP JetAdmin Utility screen, press [F5] to refresh the
list of printers. All configured print servers are displayed.
Select Device, New.
5. On the New Device screen, highlight the hardware address
of your print server. (The 12-character hardware address is
on the HP JetDirect configuration page.) See section on
printing configuration page.
6. Click Configure. A General screen is displayed.
7. Type the name of the print server and a description
(optional): then click Next. A NetWare configuration screen
is displayed.
