4.3.2 Windows 95, 98 or NT 4.0 (Client-Server)
There are 3 ways in which you may install the printer software
onto a client computer running Windows 95, 98 or NT 4.0.
Option 1
Step 1 – Install Printer Software and Associate Software to Printer
1. Insert the Starter CD or PostScript CD into your CD-ROM
drive. If the installation program does not run automatically,
access File Manager or Explorer and run SETUP.EXE on the
CD-ROM.
2. Follow the instruction to complete the installation. Select
HP 2500C/CM Printer and when prompted to select
Local/Existing or Network in the Printer Ports group,
select Network.
3. Type in the name of the server followed by the name of the
printer such as \\Computer Name\PrinterName in the Select
Network Port box.
If you do not know the Computer name or Printer name,
you may browse the network.
Option 2 (For PCL3 drivers only):
Alternatively, you may use the Microsoft Windows Add Printer
Wizard to install the printer software.
1. Click on Start and select Settings followed by Printers.
2. Double-click Add Printer.
3. For Windows 95/98, when prompted to select Local Printer
or Network Printer, select Network Printer.
For Windows NT4.0, when prompted to select My Computer
or Network Printer Server, select Network Printer Server.
4. Type in the network path or queue name of the shared
printer, e.g. \\ComputerName\PrinterName.
5. Follow the instructions on screen to complete the installation.
Option 3 (for PCL3 driver only):
If the printer software is installed in the server computer and the
port has been shared out, the printer software can be installed
onto the client computer by doing one of the following:
• Dragging the document onto a network printer icon.
• Dragging a network printer icon into the Printers Folder.
• Double-clicking a network printer icon.
• Right-clicking a network printer icon and selecting Install.
