A SERVICE OF

logo

138
Chapter 6 TCP/IP LineJet Print Server Configuration
2. Turn the LineJet Print Server on so that it immediately sends out a
BOOTP request. Wait one minute to allow the IP address assignment
process to complete. You should see the STAT LED (on the LineJet Print
Server interface) slow down indicating it knows about an IP address to
use.
3. Try to ping the LineJet Print Server IP address from a network station to
see if it can be seen on your network.
Note You will be able to communicate with the LineJet Print Server from
network stations on different subnets if the print server has been told about
its default router/gateway in the BOOTP response from the BOOTP
server.