Setting The Print Server Preferred NDS Tree (NDS)
205
3. Look under the “Novell” section and enter the new context in the “NDS
Context” field.
4. Click on the SUBMIT button when done and physically re-power the
printer to make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server. This will bring up a login screen:
telnet
ipaddress
2. You should now see a prompt displayed that has the LineJet Print
Server’s IP address followed by a colon then
root
.
ipaddress
:root>
3. At the prompt, enter:
store pserver novell context
context
4. Reset the unit to make the changes take effect.
reset
Setting The Print Server Preferred NDS Tree (NDS)
The LineJet Print Server supports Novell environments that have multiple
trees. If your environment has more than one tree, you may want to set a
preferred tree. By default, the LineJet Print Server will try to log in to each tree
it finds until it is successful.
HTML Method
1. Load a Web browser on a network station that can communicate with the
print server over TCP/IP.
2. Direct your Web browser to URL:
http://
LineJetIPaddress
/networkConf.html
(e.g., http://192.75.11.9/networkConf.html)
3. Look under the “Novell” section and enter the preferred tree in the “NDS
Preferred Tree” field.
4. Click on the SUBMIT button when done and physically re-power the
printer to make the new settings take effect.
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
