Debug Commands
231
list snmp
List Trap Table containing SNMP Managers.
list sysinfo
List the current LineJet Print Server system information (e.g., contact
name and protocol stacks enabled).
list tcpip
List all current TCP/IP network settings (e.g., IP address and subnet
mask).
list test
List the status of output tests on the I/O ports.
list time
List the current time on the LineJet Print Server.
list user
List the current user definitions (e.g., user names and types).
list var
List all pre-defined variables including any newly created ones. Any of
these defined variables can be referenced in a string by placing a
$
before the variable name (e.g.,
set model m1 trailer $FF
).
Debug Commands
The debug set of commands help troubleshoot problems that may occur on
the LineJet Print Server. Some of the output may be cryptic, but it helps when
troubleshooting.
debug eeprom
List ROM contents.
debug io
List statistics from the I/O port module.
debug ip
List IP stack statistics.
debug lpd
List statistics from the lpd daemon.
debug lpq
List statistics from the queue module.
debug mem
List statistics from the LineJet Print Server memory module.
debug nest fserver
View the Novell file server(s) the LineJet Print Server has acknowledged
and connected to.
debug nest ipx
Determine whether a board has been bound to the LineJet Print Server
under Novell and that the network number is correct for your network.
