The KLN 94 is capable of displaying the following time zones:
UTC Coordinated Universal Time (Zulu)
GST Greenland Standard Time (UTC - 3)
GDT Greenland Daylight Time (UTC - 2)
ATS Atlantic Standard Time (UTC - 4)
ATD Atlantic Daylight Time (UTC - 3)
EST Eastern Standard Time (UTC - 5)
EDT Eastern Daylight Time (UTC - 4)
CST Central Standard Time (UTC - 6)
CDT Central Daylight Time (UTC - 5)
MST Mountain Standard Time (UTC - 7)
MDT Mountain Daylight Time (UTC - 6)
PST Pacific Standard Time (UTC - 8)
PDT Pacific Daylight Time (UTC - 7)
AKS Alaska Standard Time (UTC - 9)
AKD Alaska Daylight Time (UTC - 8)
HAS Hawaii Standard Time (UTC - 10)
HAD Hawaii Daylight Time (UTC - 9)
SST Samoa Standard Time (UTC - 11)
SDT Samoa Daylight Time (UTC - 10)
LCL Local Time Zone (user-defined)
You will be able to change the time zone any time you desire on sev-
eral other pages, so don’t worry if you’re not sure which time zone to
choose. UTC—Coordinated Universal Time (also called “Zulu”) is
always a safe choice.
The local time zone (LCL) is selected on the SET 2 page, and is
defined to be a certain time offset from Zulu (UTC).
Once you have selected the desired time zone, position the cursor
over the entire time field and select the correct hour with the right
inner knob (figure 3-13). Since
24 hour time is used, be sure to
add 12 if the time is after 1:00
P.M. (2:30 P.M. becomes 1430).
Now move the cursor to the tens
of minutes position and select
the desired value, and repeat
KLN 94 Pilot’s Guide Chapter 3 Basic GPS Operation
3-5
Figure 3-13
