17
3 SET UP MODE…
8
H150.2
rSt-n
L130.8
rSt-n
O.AdJ
1.0
•2
•2
A140.5
rSt-n
•1
Average Value
This is the mean average value of the process variable
input since the average was reset.
rSt-Y. – reset
rSt-n. – do not reset
To reset, select
rSt-Y. then press the key.
Maximum Value
This is the maximum value of the process variable
since the maximum was reset.
rSt-Y. – reset
rSt-n. – do not reset
To reset, select
rSt-Y. then press the key.
Minimum Value
This is the minimum value of the process variable since
the minimum was reset.
rSt-Y. – reset
rSt-n. – do not reset
To reset , select
rSt-Y. then press the key.
Offset Adjustment
An offset can be applied to the process variable input to
enable spot calibration or the removal of system errors.
[±10% of engineering range]
…3.2 Set Up Level (Level 2)
•1 The average value is reset automatically on power-up and can also be reset
from a digital input – see Section 4.3.4.
•2 The maximum and minimum values are reset automatically on power-up and
can also be reset from a digital input – see Section 4.3.4.
